Technical data

9031240 E5 ConÞguration Views
3-3
NBR-620 Device ConÞguration View
Interface ConÞguration Table
The Device ConÞguration View provides the following information:
Contact Status
This Þeld indicates if a connection with the device has been established.
Firmware Revision
The Þrmware revision for the device being modeled.
Hardware Revision
The hardware revision for the device being modeled.
Click on this button to access the Community Names tool. The Community
Names tool lets you quickly view and change community names for any MIB
component. It also allows you to enable or disable certain MIB components to
free up system resources. (For more information on this tool, refer to the
SPECTRUM Portable Management Application (SPMA) Tools Guide.)
Click on this button to access the TFTP Download Application tool. The TFTP
Download tool lets you set up download parameters and control the download.
In addition, the TFTP Download tool can direct a device to use Þrmware
located on a network server instead of booting from code located on the device.
(For more information on this tool, refer to the SPECTRUM Portable
Management Application (SPMA) Tools Guide.)
Click on this button to access the Trap Table window. This view allows you
enable and disable traps and specify the IP address of the management
workstation that receives and processes the trap messages. (For more
information on this tool, refer to the SPECTRUM Portable Management
Application (SPMA) Tools Guide.)
Interface ConÞguration Table
The Interface ConÞguration Table provides the following conÞguration
information for each of the NBR-620Õs ports:
Number of Interfaces
Displays the number of interfaces available from this device.
Index
Displays the number of the interface.
Type
The type of hardware interface for the port. Possible interface types and a
brief description of each type are shown in Table 3-1.
Component Table
Download Application
Trap Table