Technical data

Telnet
Device View NBR-620, NBR-420 and NBR-220
2-20 Management Module Guide
Telnet
A Telnet connection is the establishment of a telnet session with a remote
device through which you can enter commands just as if you were connected
locally.
You can telnet to the device by highlighting the NBR-620 icon and selecting
Utilities -> Telnet from the Icon Subviews menu or by clicking on an NBR-
620 icon with the right mouse button and selecting Utilities -> Telnet from
the Subviews menu.
To activate the telnet session enter the password at the Password: prompt.
The default password is any one of the device community strings.
Once the password is entered, the Console -> prompt or the MIBNav ->
prompt displays. The MIB (Management Information Base) Navigator allows
you access to a command set from which you can conÞgure and manage
objects in the device MIBs. For assistance in using the MIB Navigator, type
help at the prompt. Refer to the Cabletron document NBR-620 UserÕs Guide
for MIB Navigator information.