Technical data

9031240 E5 Device View

2-17

Physical Device View

Gauge Type

This option allows you to select either a numeric or linear representation of

the Logical Gauge. The following section describes the Logical Gauge buttons.

Apply the current selections to the Logical Gauge. The settings are not saved.

Save the current gauge settings while running SpectroGRAPH.

Reset back to the last Keep Settings selections.

Close the Gauge Control Panel.

Reset back to the default attribute of Load.

Physical Device View

This section describes the module information available from the NBR-620

Physical Device View, which displays a physical representation of the

NBR-620 module. Figure 2-5 provides an example of an NBR-620 Physical

Device View.

Accessing the Physical Device View

The Physical Device View is accessed using one of the following methods:

¥ Double-click on the Devie View button of the NBR-620 device icon. This

will open the Device View that was opened last (i.e., Chassis, Interface or

Physical).

Apply

Keep Settings

Reset

Default