Technical data

9031240 E5 Device View
2-15
Interface Device View
Gauge Control Panel
Network Information
The Network Information area of the Interface Options Panel allows you to
select what interface information is displayed in the Network Information
Label zone. Possible selections are ADDRESS, NAME, or MASK.
Interface Description
Selecting an Interface Icon displays the type of interface in the Interface
Description area of the Interface Options Panel.
Gauge Control Panel
The Gauge Control Panel allows you to change the type of statistical
information presented in the Logical Gauge area of the Logical Interface Icon.
To access the Gauge Control Panel, either double-click on the Interface
Options Panel or single-click on the panel to highlight it and then select
Gauge Control Panel from the Icon Subviews menu. The Gauge Control
Panel is divided into the sections described below.
Selected Attribute
This area of the Gauge Control Panel allows you to select the statistical
attribute displayed on the Logical Interface IconÕs Gauge. The label changes
color to reßect the attribute selected. Table 2-10 and Table 2-11 provide a list
of the attributes and their corresponding colors.
Gauge Mode
This area of the Gauge Control Panel allows you to select the mode presented
by the Logical Gauge. Possible selections are Totals, Rates, or Percentages.
The Percentages selection represents the percentage of the interface compared
to the rest of the interfaces. Table 2-10 shows the displayed attributes and
their color deÞnitions if the Totals mode is selected. Table 2-11 shows the
displayed attributes and their color deÞnitions if the Rates mode is selected.