Technical data
NBR-620 Applications
Introduction NBR-620, NBR-420 and NBR-220
1-6 Management Module Guide
NBR-620 Applications
The NBR-620 supports both common and device-speciÞc applications
described in the MIB II Applications, Bridging Applications, and
Miscellaneous Applications references. SPECTRUM management of the NBR-
620 is based on the following common and device-speciÞc applications:
¥ Bridging (CSIBridge)
- Spanning Tree (Ct_Stp_App)
- Transparent (Transparent_App)
- Ethernet Special Database (Ct_BdgEnet_App)
- Static (Static_App)
¥ MIB-II (SNMP2_Agent)
- IP (IP2_App)
- System (System2_App)
- ICMP (ICMP_App)
- UDP (UDP2_App)
¥ Download App (CtDownLoadApp)
¥ FDDI (FddiSMT)
The following major application models are also available if you have
purchased the associated services:
¥ Routing Services (CtRouter)
¥ DLM (DLM_Agent)
¥ Standard RMON (RMON App)
Refer to the documentation provided with the RMON, DLM and Routing
Services for descriptions of these capabilities.
NOTE
The FDDI application appears only if a BRIM-F6 is inserted in the NBR-620.
NOTE
If there is an Uninterruptable Power Supply (UPS) connected to your device,
CtUPS_App will show as a major software application.