- cabletron systems User's Guide SmartSwitch BRIM-A6
Table Of Contents
- Title Page
- Notice
- Contents
- Introduction
- Installation
- Local Management
- 3.1 Local Management Keyboard Conventions
- 3.2 Using LIM to create PVCs
- 3.3 Using LM to Create PVCs
- 3.3.1 BRIM-A6 Setup Screen Fields
- 3.3.2 BRIM-A6 Setup Screen Commands
- 3.3.3 Using BRIM-A6 Setup Screen Commands
- 3.3.4 Accessing the BRIM-A6 Add/Delete Entry Scree...
- 3.3.5 BRIM-A6 Add/Delete Entry Screen Fields
- 3.3.6 BRIM-A6 Add/Delete Entry Screen Commands
- 3.3.7 Adding a PVC
- 3.3.8 Modifying a PVC
- 3.3.9 Deleting a PVC
- LANVIEW LEDs
- APIM Specifications
- ATM Overview
BRIM-A6 User’s Guide Page A-1
APPENDIX A
APIM SPECIFICATIONS
This Appendix describes the ATM Port Interface Modules.
A.1 APIM-11 SPECIFICATIONS
Physical Interface: TAXI
Media Type: Multimode Fiber
Data Rate: 100 Mbps
Connector Type: SC
Typical Link Distance: 2 Kilometers
A.2 APIM-21 SPECIFICATIONS
Physical Interface: OC3
Media Type: Multimode Fiber
Data Rate: 155 Mbps
Connector Type: SC
Typical Link Distance: 2 Kilometers
book Page 1 Thursday, April 18, 1996 2:18 PM