- cabletron systems User's Guide SmartSwitch BRIM-A6
Table Of Contents
- Title Page
- Notice
- Contents
- Introduction
- Installation
- Local Management
- 3.1 Local Management Keyboard Conventions
- 3.2 Using LIM to create PVCs
- 3.3 Using LM to Create PVCs
- 3.3.1 BRIM-A6 Setup Screen Fields
- 3.3.2 BRIM-A6 Setup Screen Commands
- 3.3.3 Using BRIM-A6 Setup Screen Commands
- 3.3.4 Accessing the BRIM-A6 Add/Delete Entry Scree...
- 3.3.5 BRIM-A6 Add/Delete Entry Screen Fields
- 3.3.6 BRIM-A6 Add/Delete Entry Screen Commands
- 3.3.7 Adding a PVC
- 3.3.8 Modifying a PVC
- 3.3.9 Deleting a PVC
- LANVIEW LEDs
- APIM Specifications
- ATM Overview
Chapter 4: LANVIEW LEDs
Page 4-2 BRIM-A6 User’s Guide
4.2 APIM LEDs
Table 4-2 describes each of the APIM LEDs.
Table 4-2 APIM LEDs
LED Definition
LNK
(Link)
Green - Have link.
Off - No link.
STS
(Status)
Green - APIM OK.
Red - Fault with media. In most
cases, the APIM automatically
corrects this condition without
interrupting operations. If the LED is
red and remains red, contact
Cabletron Systems Technical
Support.
book Page 2 Thursday, April 18, 1996 2:18 PM