Specifications

ATX Switch Events and Alarms
Event and Alarm Messages ATX Switch
4-6 Management Module Guide
CsEvFormat/Event019d0205
{d "%w- %d %m-, %Y - %T"} -
The DC output for the second power
supply on device, {m} of type {t} is {T
SMC_Power 3}. Trap severity is {T
SMC_Severity 1}.
CsPCause/Prob019d0205
PROBABLE CAUSE: The DC
output of the unit’s second power
supply has changed.
RECOMMENDED ACTIONS: 1)
Refer to Event log for current DC
output state. If DC output state is
bad, 2) Check second power
supply unit on device. 3) Check
power source to the device.
CsEvFormat/Event019d0211
{d "%w- %d %m-, %Y - %T"} -
The optical bypass for FDDI port {I 4}
has become {T SMC_FddiSB 3} for device
{m} of type {t}. Trap severity is {T
SMC_Severity 1}.
CsPCause/Prob019d0211
PROBABLE CAUSE: The FDDI
port optical bypass has changed.
RECOMMENDED ACTIONS: 1)
Refer to Event log for current
optical bypass port state. 2) Check
the optical bypass port.
CsEvFormat/Event019d0212
{d "%w- %d %m-, %Y - %T"} -
The fuse to the optical bypass for the
FDDI port {I 4} is {T SMC_FddiOBS 3}
for device {m} of type {t}. Trap severity is
{T SMC_Severity 1}.
CsPCause/Prob019d0212
PROBABLE CAUSE: The state of
the FDDI port optical bypass fuse
has changed.
RECOMMENDED ACTIONS:
1)Refer to Event log for current
optical bypass fuse state.
CsEvFormat/Event019d0213
{d "%w- %d %m-, %Y - %T"} -
The FDDI port’s Station State for FDDI
port {I 4} on device {m} of type {t} has
changed to {0 3}. Trap severity is {T
SMC_Severity 1}.
CsPCause/Prob019d0213
PROBABLE CAUSE: The Station
state of the FDDI port has
changed.
RECOMMENDED ACTIONS: 1)
Refer to Event log for state
infomation.
Table 4-1. ATX Switch Events and Alarms (Continued)
Message in the Event Log
Alarm View Probable Cause
Message