Specifications

9032068 E2 Event and Alarm Messages
4-3
ATX Switch Events and Alarms
CsEvFormat/Event019d0005
{d "%w- %d %m-, %Y - %T"} -
For device, {m}, number of packets not
sent because of a multicast storm is {I 3}.
Trap severity is {T SMC_Severity 1}.
CsPCause/Prob019d0005
Packets not sent. Multicast storm.
CsEvFormat/Event019d0006
{d "%w- %d %m-, %Y - %T"} -
For device, {m}, the number of packets
not received because of internal buffer
congestion is {I 3}. Trap severity is {T
SMC_Severity 1}.
CsPCause/Prob019d0006
Packets not received. Internal
buffer congestion.
CsEvFormat/Event019d0007
{d "%w- %d %m-, %Y - %T"} -
For device, {m}, port, {I 5}, filtered and
discarded a packet from MAC address {0
3}. Trap severity is {T SMC_Severity 1}.
CsPCause/Prob019d0007
Filtered and discarded a packet. A
port’s combination filter has
exceeded the filter’s limits.
CsEvFormat/Event019d0008
{d "%w- %d %m-, %Y - %T"} -
Debug string, {I 3} received from device,
{m}: {0 5}.
CsPCause/Prob019d0008
Debug string received from the
device.
CsEvFormat/Event019d0009
{d "%w- %d %m-, %Y - %T"} -
Device, {m}, has finished a loopback test
or detected a loopback error. The current
operational state is {T SMC_LoopBack
3}. Packets transmitted, but not
received: {I 5}. Bad packets received:
{I 7}. Trap severity is
{T SMC_Severity 1}.
CsPCause/Prob019d0009
A loopback test was completed, or
there is a loopback error.
CsEvFormat/Event019d0013
{d "%w- %d %m-, %Y - %T"} -
Device, {m}, reports the trunking
protocol error, {T SMC_TrunkError 3}.
Trap severity is {T SMC_Severity 1}.
CsPCause/Prob019d0013
An error has occured in trunking.
Table 4-1. ATX Switch Events and Alarms (Continued)
Message in the Event Log
Alarm View Probable Cause
Message