Specifications

9032068 E2 Configuration Views
3-3
Device Configuration View
Interface Index
A unique value for each interface. Its value ranges between 1 and the value of
ifnumber. The value 0 for each interface must remain constant at least from
one reinitialization of the entity’s network management system to the next
reinitialization.
Physical Address
The interface’s address at the protocol layer immediately below IP in the
protocol stack. The Ethernet address of the bridge is returned, for both
channels of the bridge.
Network Address
The network address for the interface.
This button allows you to reconfigure the device. When the reconfiguration is
complete, the “Action Successful” dialog box appears.
Interface Configuration Table
The Interface Configuration Table provides port configuration information for
each of the ATX Switch’s ports. The Interface Configuration Table and its
corresponding entry-specific views provide the following information:
Index
The port number on the ATX Switch.
Description
A textual description of the interface. This description may include the name
of the manufacturer, the product name, and the version number of the
hardware interface.
Type
The type of interface for the port. Possible interface types and a brief
description of each type are listed in Table 3-1.
Reconfigure
Table 3-1. ATX Switch Interface Types
Interface Type Description
Other None of the following
ETHERNET Ethernet CSMA/CD
ISO88023 ISO CSMA/CD
ISO88024 ISO token bus
ISO88025 ISO token ring
FDDI Fiber Distributed Data Interface