Specifications

9032068 E2 Device Views
2-5
Accessing the Logical or Interface Device Views
Logical Interface Icons
Interface Number Label/Device Topology View
Zone (a) of the Logical Interface Icon accesses the ATX Switch Device Topology
view, discussed in SPECTRUM Views. The zone also displays the interface
number.
Administrative Status Label/IF Status View
Zone (b) of the Logical Interface Icon displays the IF Status label and an
appropriate background color to represent the current status of the interface.
Table 2-1 shows the possible interface statuses and their respective colors.
Table 2-1. Interface Status Label Definitions
Double-clicking on this IF Status view label accesses the Interface Status view
which provides the following information on the status of the interface:
Operational Status
A read-only indicator button displaying the current operational state of the
interface (ON, OFF, or Testing).
Administrative Status
The desired operational state of the interface (Default, ON, OFF, or Testing).
You may change the value for Administrative Status.
Interface Type Label/IF Configuration View
The IF Configuration view label (c) Logical Interface Icon displays the type of
ATX Switch interface. Possible device interface types are shown in Chapter 3,
Configuration Views. This view is also accessed by clicking the Config button
in the Performance view (see label (f)). Double-clicking on the IF
Configuration view label accesses the Interface Configuration view, which
provides the following information for the interface below the banner:
Operation Status
This read-only field provides the current operational state of the interface
(On, Off, or Testing).
Operational
Status
Administrative
Status
Text Display Color
ON ON ON Green
OFF OFF OFF Blue
OFF ON OFF Yellow
Testing Testing Test Red