Specifications

PORT Group
ATX MIB Reference Guide 5-15
5.5 PORT GROUP
fddimibPORT {fddimib 5}
The FDDI PORT Group parameters are the following:
fddimibPORTNumber {fddimibPORT 1}
Integer Read-only
The total number of PHYS possible (across all FDDI ports) on this unit.
5.5.1 PORT Table
fddimibPORTTable {fddimibPORT 2}
Not-Accessible
A list of interface entries; one per each PHY. The entries are indexed by
fddimibPORTSMTIndex and fddimibPORTIndex.
fddimibPORTEntry {fddimibPORTTable 1}
Not-Accessible
A set of operational attributes for a PHY entry. The individual components are
described below.
fddimibPORTSMTIndex {fddimibPORTEntry 1}
Integer Read-Only
The value of the SMT index associated with this PORT.
fddimibPORTIndex {fddimibPORTEntry 2}
Integer Read-Only
A unique value for each PORT within a given SMT, which is the same as the
corresponding resource index in SMT (corresponds to ANSI {fddiPORT 29}).
This is 1 (for a PHY A) or 2 (for a PHY B).
fddimibPORTMyType {fddimibPORTEntry 3}
Integer Read-Only
The value of the PORT’s PC_Type (corresponds to ANSI {fddiPORT 12}, refer
to ANSI 9.4.1, and 9.6.3.2).