Specifications

Chapter 5: FDDI MIB
5-14 ATX MIB Reference Guide
5.4.2 PATH Config Table
fddimibPATHConfigTable {fddimibPATH 3}
Not-Accessible
A table of Path configuration entries. The entries are indexed by
fddimibPATHConfigSMTIndex, fddimibPATHConfigPATHIndex and
fddimibPATHConfigTokenOrder.
fddimibPATHConfigEntry {fddimibPATHConfigTable 1}
Non-Accessible
A set of operational attributes for a path configuration entry. The individual
components are described below.
fddimibPATHConfigSMTIndex {fddimibPATHConfigEntry 1}
Integer Read-Only
The value of the SMT index associated with this configuration entry.
fddimibPATHConfigPATHIndex {fddimibPATHConfigEntry 2}
Integer Read-Only
The value of the PATH resource index associated with this configuration entry.
fddimibPATHConfigTokenOrder {fddimibPATHConfigEntry 3}
Integer Read-Only
An object associated with Token order for this entry. Thus if the token passes
resources a, b, c, and d, in that order, then the value of this object for these
resources would be 1, 2, 3, and 4, respectively.
fddimibPATHConfigResourceType {fddimibPATHConfigEntry 4}
Integer Read-Only
The type of resource associated with this configuration entry. The value is 2 (for a
MAC) or 4 (for a PHY).
fddimibPATHConfigResourceIndex {fddimibPATHConfigEntry 5}
Integer Read-Only
The value of the SMT resource index used to refer to the instance of this MAC or
Port resource.
fddimibPATHConfigCurrentPath {fddimibPATHConfigEntry 6}
Integer Read-Only
The current insertion status for this resource on this Path.