Specifications

Chapter 5: FDDI MIB
5-6 ATX MIB Reference Guide
fddimibSMTTimeStamp {fddimibSMTEntry 24}
Integer Read-Only
This variable assumes the value of TimeStamp, in the unit of milliseconds
(corresponds to ANSI {fddiSMT 51}, refer to ANSI SMT 8.3.2.1).
fddimibSMTTransitionTimeStamp {fddimibSMTEntry 25}
Integer Read-Only
This variable assumes the value of the TransitionTimeStamp, in the unit of
milliseconds (corresponds to ANSI {fddiSMT 52}, refer to ANSI SMT 8.3.2.1).
fddimibSMTStationAction {fddimibSMTEntry 26}
Integer Read-Write
An SMT action to be performed (corresponds to ANSI {fddiSMT 60}. Only
connect (2) and disconnect (3) are supported. The value of
fddimibSMTStationAction is not saved in the event that the unit reboots.
5.2 MAC GROUP
fddimibMAC {fddimib 2}
FddimibMACNumber {fddimibMAC 1}
Integer Read-Only
The number of FDDI port configured in Configuration EEPROM. Note that
fddimibMACNumber and fddimibSMTNumber always have identical values in
the unit.
5.2.1 MAC Table
fddimibMACTable {fddimibMAC 2}
Not-Accessible
A list of interface entries; one per FDDI port. The entries are indexed by
fddimibMACSMTIndex and fddimibMACIndex.
fddimibMACEntry {fddimibMACTable 1}
Not-Accessible
A set of operational attributes for an FDDI port. The individual components are
described below.