Specifications

Token Ring Group

ATX MIB Reference Guide 4-7

dot5StatsSingles {dot5StatsEntry 18}

Counter Read-Only

The number of times the interface has sensed that it is the only station on the ring.

This will happen if the interface is the ﬁrst one up on a ring, or if there is a

hardware problem.

dot5StatsFreqErrors {dot5StatsEntry 19}

Counter Read-Only

The number of times the interface has detected that the frequency of the

incoming signal differs from the expected frequency by more than that speciﬁed

by the IEEE 802.5 standard.

4.1.3 Token Ring Timer Table

dot5TimerTable {dot5 3}

This entire group is just minimally supported (i.e., the unit returns a GetResponse

with a noSuchName ErrorStatus).

4.1.4 Token Ring Tests

dot5Tests {dot5 4}

There are no MIB variables in this group.

4.1.5 Token Ring Chipsets

dot5ChipSets {dot5 5}

There are no MIB variables in this group.