Specifications

Chapter 4: Token Ring MIB
4-6 ATX MIB Reference Guide
dot5StatsSoftErrors {dot5StatsEntry 11}
Counter Read-Only
The number of Soft Errors the interface has detected. It directly corresponds to
the number of Report Error MAC frames that this interface has transmitted. Soft
Errors are those which are recoverable by the MAC layer protocols.
dot5StatsHardErrors {dot5StatsEntry 12}
Counter Read-Only
The number of times this interface has detected an immediately recoverable fatal
error. It denotes the number of times this interface is either transmitting or
receiving beacon MAC frames.
dot5StatsSignalLoss {dot5StatsEntry 13}
Counter Read-Only
The number of times this interface has detected the loss of signal condition from
the ring.
dot5StatsTransmitBeacons {dot5StatsEntry 14}
Counter Read-Only
The number of times this interface has transmitted a beacon frame.
dot5StatsRecoverys {dot5StatsEntry 15}
Counter Read-Only
The number of Claim Token MAC frames received or transmitted after the
interface has received a Ring Purge MAC frame. This counter signifies the
number of times the ring has been purged and is being recovered back into a
normal operating state.
dot5StatsLobeWires {dot5StatsEntry 16}
Counter Read-Only
The number of times the interface has detected an open or short circuit in the lobe
data path. The adapter will be closed and dot5RingState will signify this
condition.
dot5StatsRemoves {dot5StatsEntry 17}
Counter Read-Only
The number of times the interface has received a Remove Ring Stations MAC
frame request. When this frame is received the interface will enter the close state
and dot5RingState will signify this condition.