Specifications

Chapter 2: TCP/IP MIB-II
2-26 ATX MIB Reference Guide
snmpOutGenErrs {snmp 24}
Counter Read-Only
The total number of SNMP PDUs created by the unit, with a value of “genErr” in
the PDU’s “ErrorStatus”.
snmpOutGetRequests {snmp 25}
Counter Read-Only
Always zero, since the unit never creates any SNMP request PDUs.
snmpOutGetNexts {snmp 26}
Counter Read-Only
Always zero, since the unit never creates any SNMP request PDUs.
snmpOutSetRequests {snmp 27}
Counter Read-Only
Always zero, since the unit never creates any SNMP request PDUs.
snmpOutGetResponses {snmp 28}
Counter Read-Only
The total number of SNMP GetResponse PDUs created by the unit.
snmpOutTraps {snmp 29}
Counter Read-Only
The total number of SNMP Trap PDUs created by the unit.
snmpEnableAuthenTraps {snmp 30}
Integer Read-Write
Whether authentication failures should cause the unit to generate
authentication-failure Trap PDUs. Values include:
• enabled (1) - generate traps
• disabled (2) - do not generate traps