Specifications

SNMP Group
ATX MIB Reference Guide 2-23
2.11 SNMP GROUP
snmp {mib-2 11}
The TCP/IP SNMP Group parameters are described below.
snmpInPkts {snmp 1}
Counter Read-Only
The number of SNMP PDUs received by the unit.
snmpOutPkts {snmp 2}
Counter Read-Only
The number of SNMP PDUs created by the unit.
snmpInBadVersions {snmp 3}
Counter Read-Only
The number of SNMP PDUs received by the unit which had an unsupported
SNMP version.
snmpInBadCommunityNames {snmp 4}
Counter Read-Only
The number of SNMP PDUs received by the unit which had an unrecognized
SNMP community name.
snmpInBadCommunityUses {snmp 5}
Counter Read-Only
The number of SNMP PDUs received by the unit which had an authentication
failure.
snmpInASNParseErrs {snmp 6}
Counter Read-Only
The number of SNMP PDUs received by the unit which had an ASN.1 parsing
error while being decoded by the unit.
snmpInBadTypes {snmp 7}
Counter Read-Only
All GetResponse PDUs indicate a noSuchName ErrorStatus, since this variable is
no longer used.