Specifications

Chapter 2: TCP/IP MIB-II
2-8 ATX MIB Reference Guide
• {fddi} - for FDDI ports (fddi is defined later, as {transmission 15}).
• {dot5} - for Token Ring ports (dot5 is defined later, as {transmission 9}).
2.3 ADDRESS TRANSLATION GROUP
at {mib-2 3}
The TCP/IP Address Translation Group parameters are minimally supported (i.e.,
for any parameter in this group, the unit returns a GetResponse with a
noSuchName ErrorStatus). It is anticipated that the Address Translation Group
will be deleted from TCP/IP MIB III, since there will be separate address
translation tables for every type of network protocol (indeed, TCP/IP MIB II
already defines the IP Address Translation Table).
The TCP/IP Address Translation Group parameters are described below.
atTable {at 1}
Not-Accessible
atEntry {atTable 1}
Not-Accessible
atIfIndex {atEntry 1}
Integer Read-Write
All GetResponse PDUs indicate a noSuchName ErrorStatus.
atPhysAddress {atEntry 2}
Physical Address Read-Write
All GetResponse PDUs indicate a noSuchName ErrorStatus.
atNetAddress {atEntry 3}
Network Address Read-Write
All GetResponse PDUs indicate a noSuchName ErrorStatus.