Specifications

Chapter 11: Traps
11-6 ATX MIB Reference Guide
• swdisWriteStatus – Sent when a bank of Flash EPROM has been erased. If
swdisWriteStatus indicates success, then the unit is ready to be downloaded
with the new software. The following parameters are also included:
- swdisDesc
• swdisDesc – Sent in conjunction with swdisWriteStatus; swdisDesc does not
need to be acknowledged.
• snmpsmtUpstreamRsp – Sent when the upstream neighbor of the requested
FDDI device has been learned. The following parameters are also included:
- snmpsmtUpstreamReq – Sent in conjunction with
snmpsmtUpstreamRsp; This variable does not need to be acknowledged
and is Obsolete.
- snmpsmtUpstreamDescriptor – Sent in conjunction with
snmpsmtUpstreamRsp; This variable does not need to be acknowledged
and is Obsolete.
- snmpsmtUpstreamState – Sent in conjunction with
snmpsmtUpstreamRsp; This variable does not need to be acknowledged
and is Obsolete.
• sifFunctions – Sent whenever the current functional state (active protocols) of
the port has changed.
• sifCongested – Sent whenever outbound congestion control has been invoked
for the port.
• sifState – Sent whenever the Spanning Tree state of the port has changed. This
is obsolete.
• sifDesigCost – Sent whenever the cost to the Spanning Tree Root Bridge from
the designated port of the LAN/WAN to which the port is attached has
changed. This is obsolete.
• sifDesigRoot – Sent whenever the Root Bridge ID in received Spanning Tree
Configuration BPDU’s from the port has changed. This is obsolete.
• sifDesigBridge – Sent whenever the bridge ID of the Spanning Tree
designated bridge of the LAN/WAN to which the port is attached has
changed. This is obsolete.
• sifDesigPort – Sent whenever the port ID of the Spanning Tree designated
port of the LAN/WAN to which the port is attached has changed.
• sifErrorsFlag – Sent whenever the number of hardware errors in received and
transmitted packets has exceeded the port’s limit. see sifThreshold and
sifThresholdTime.