Specifications

Priority 1 Traps
ATX MIB Reference Guide 11-5
• configPowerDc1 – Sent whenever the DC output of the unit’s first power
supply transitions from on to off, and vice versa.
• configPowerDc2 – Sent whenever the DC output of the unit’s second power
supply transitions from on to off, and vice versa.
• configPowerPresent1 – Sent whenever the presence of the unit’s first power
supply transitions from present to not present, and vice versa.
• configPowerPresent2 – Sent whenever the presence of the unit’s second
power supply transitions from present to not present, and vice versa.
• configStorageFailure – Sent if the unit’s Configuration EEPROM has failed.
The unit will not be able to reboot, and must be returned to the factory.
• configAuthenticationFailure – sent whenever the unit has sent the SNMP
generic Authentication Failure Trap. The purpose of this trap is to provide a
reliable (i.e., acknowledge-required) mechanism for an authentication failure.
Therefore, multiple occurrences of this trap indicate either multiple
authentication failures or a failure to receive the trap acknowledgment.
• ppeTxCongests – Sent whenever packets destined for the unit itself were
discarded due to lack of buffer space.
• stRootID – Sent whenever the unit’s Spanning Tree Root Bridge ID has
changed. (This MIB variable is obsolete.)
• stRootCost – Sent whenever the unit’s Spanning Tree cost to the Root Bridge
has changed. (This MIB variable is obsolete.)
• stRootPort – Sent whenever the unit’s Spanning Tree root port has changed.
(This MIB variable is obsolete.)
• stTopChange – Sent whenever the unit has started or stopped the Spanning
Tree topology change procedure.
• stActMaxAge – Sent whenever the unit’s Spanning Tree Maximum Age has
changed. (This MIB variable is obsolete.)
• stActHello – Sent whenever the unit’s Spanning Tree Hello Time has
changed. (This MIB variable is obsolete.)
• stActDelay – sent whenever the unit’s Spanning Tree Forward Delay Time
has changed. (This MIB variable is obsolete.)
• meshCostChange – Obsolete.
• meshSubnet – Obsolete.