Specifications

Chapter 10: Cabletron MIB
10-86 ATX MIB Reference Guide
srtrdiscEntry {srtrdiscTable 1}
Not-Accessible
srtrdiscIfIndex {srtrdiscEntry 1}
Integer Read-Only
Identifies the interface (port) to which this entry’s information belongs. The value
of this variable corresponds to ifIndex, as well as most of the other port
identification values in related MIBs.
srtrdiscState {srtrdiscEntry 2}
Integer Read-Write
Specifies whether or not the router discovery protocol is to be used for this
interface. Defaults to disabled (2). Router discovery is not activated unless IP
routing is also enabled (1) for this interface. (See sprotoIpRoute.) Values include:
• enabled (1)
• disabled (2)
srtrdiscAdvertisementAddress {srtrdiscEntry 3}
Integer Read-Write
The IP address to be used for multicast router advertisements for this interface. If
multicast (1), the all-systems multicast 224.0.0.1 is used. If broadcast (2), the
limited-broadcast 255.255.255.255 is used.
srtrdiscAdvertisementInterval {srtrdiscEntry 4}
Integer Read-Write
The interval at which multicast router advertisements are to be transmitted, in
seconds. Allowable values range between 4 and 1800.
srtrdiscLifetime {srtrdiscEntry 5}
Integer Read-Write
The value to be used for the lifetime field of router advertisements. Values range
from srtrdiscAdvertisementInterval to 9000.
srtrdiscPreference {srtrdiscEntry 6}
Integer Read-Write
The preferability of this interface’s address as a default router, relative to other
routers on the same subnet.