Specifications

Chapter 10: Cabletron MIB
10-80 ATX MIB Reference Guide
sprotoOspf {sprotoEntry 14}
Integer Read-Write
Specifies whether the internet Open Shortest Path First protocol is to be used over
this port. Only valid if sprotoIpRoute is enabled (not currently supported). Either:
• enabled (1)
• disabled (2)
sprotoArpProxy {sprotoEntry 15}
Integer Read-Write
Specifies whether the port is to respond to internet ARP requests for which the
unit is the next hop in a routed path. Only valid if sprotoIpRoute is enabled.
Either:
• enabled (1)
• disabled (2)
sprotoIbm8209Lsaps {sprotoEntry 16}
Octet String Read-Write
Specifies up to eight LSAPs for which IBM 8209 style Token Ring to Ethernet
encapsulation is to be performed. Only valid if sprotoIbmLlcTranslate is enabled.
sprotoBootpRelay {sprotoEntry 17}
Integer Read-Write
Specifies whether or not this port is to relay BOOTP packets, as described in
RFC-951 and subsequent internet drafts. Only valid if sprotoIpRoute is enabled.
Either:
• enabled (1)
• disabled (2)
sprotoNetbiosTranslate {sprotoEntry 18}
Integer Read-Write
Specifies whether, when bridging netbios packets which are source routing
explorer frames, the routing information is to be stripped or propagated. Options
include:
• passRif (1)
• stripRif (2)
• passBoth (3)