Specifications

ATX Group
ATX MIB Reference Guide 10-77
sprotoBridge {sprotoEntry 2}
Integer Read-Write
This variable defines the bridging method to be applied to frames received from,
or destined to, this port. Ethernet and FDdI ports may be configured for:
• transparent (1)
• srt (3)
• none (4)
Token Ring ports may be configured for any of the options listed above and also
for:
• sr (2)
The UART may only be configured to none.
sprotoSuppressBpdus {sprotoEntry 3}
Integer Read-Write
Allows transmission of spanning tree protocol packets to be suppressed. If
norman (1), 802.1d spanning tree packets and source-routing spanning tree
packets are transmitted as usual. If suppressed (2), these packets are not
transmitted. This option may be needed for interoperability with non-802.1d
spanning tree protocols (e.g., DEC LanBridge 100).
sprotoIpRoute {sprotoEntry 4}
Integer Read-Write
Specifies whether or not this port is to be used for IP routing. either:
• enabled (1)
• disabled (2)
sprotoIpxRoute {sprotoEntry 5}
Integer Read-Write
Specifies whether or not this port is to be used for Novell NetWare or IPX
routing. either:
• enabled (1)
• disabled (2)