Specifications

Chapter 10: Cabletron MIB
10-44 ATX MIB Reference Guide
sifFilterFlags {sifEntry 11}
Integer Read-Write
Special filter flags. The value can be one of the following:
0x0000 DEFAULT Turns the filter off
0x0001 NO_SOURCE_SAME, broadcast all packets from this port that
have identical source and destination addresses.
0x0002 NO_SOURCE_LEARNT, do not forward any packets from this
port, except those with a pre-defined source address.
0x0004 NO_LEARNING, do not perform the spanning tree learning
process, for the packets received from this port.
0x0008 NO_DEST_LEARNT, do not forward any packets to this port,
except those with a pre-defined destination address.
sifCongestTime {sifEntry 12}
TimeTicks Read-Write
When a port becomes congested, the PPE will discard any packets destined to the
port for this many centiseconds following the congestion alarm. Possible values
are 0 through 5 minutes, except for port 1 (the out-of-band management port)
which is always 0.
sifQueueTime {sifEntry 13}
TimeTicks Read-Write
The time, in centiseconds, after which an element in a transmit queue will be
flushed.
sifPortCost {sifEntry 14}
Obsolete
sifStPriority {sifEntry 15}
Obsolete
sifFunctions {sifEntry 16}
Integer Read-Only
The current functional state (protocols which have been activated and are
operational) of the port. The following values or combinations thereof are
supported:
0x0001 NMS - shows if the port is enabled for communicating with the
NMS (see ifOperStatus)