Specifications

ATX Group
ATX MIB Reference Guide 10-29
swdisWriteStatus {swdis 3}
Integer Read-Only
The status of the erase/write operation. The possible values are:
• in-progress (1) - An operation is currently in progress
• success (2) - The last operation completed successfully
• config-error (3) - Configuration EPROM encountered an error
• flash-error (4) - Flash EPROM encountered an error
• config-and-flash-errors (5) - Both Configuration EPROM and Flash EPROM
encountered errors
swdisConfigIp {swdis 4}
IP Address Read-Write
The IP address of the NMS (i.e., any IP host) that is allowed to use TFTP to send/
retrieve the configuration file of the ATX. A value of 0.0.0.0 (which is the factory
specified default) prevents any NMS from obtaining access, while a value of
255.255.255.255 gives every NMS permission.
swdisConfigRetryTime {swdis 5}
Integer Read-Write
The number of seconds that the ATX will wait for an acknowledgment before it
retransmits an unacknowledged TFTP data block. The factory specified default is
5 seconds.
swdisConfigTotalTimeout {swdis 6}
Integer Read-Write
The number of seconds that the ATX will wait for an acknowledgment to a data
block before it cancels a TFTP session. The factory specified default is 25
seconds.