Specifications

Chapter 10: Cabletron MIB
10-22 ATX MIB Reference Guide
ppeStaticPreference {ppe 14}
Integer Read-Write
The value to assign to ipRouteMetric2, when adding a statically-defined entry to
the IP Routing Table. The route preference value for a static entry is 1. Note that
for route preferences the smaller the value, the higher the preference.
ppeOspfPreference {ppe 15}
Integer Read-Write
The value to assign to ipRouteMetric2, when adding an OSPF-learned entry to
the IP Routing Table. The route preference value for an OSPF-learned entry is 8.
Note that for route preferences the smaller the value, the higher the preference.
ppeRipPreference {ppe 16}
Integer Read-Write
The value to assign to ipRouteMetric2, when adding a RIP learned entry to the IP
Routing Table. The route preference value for a RIP-learned entry is 4. Note that
for route preferences the smaller the value, the higher the preference.
ppeEgpPreference {ppe 17}
Integer Read-Write
The value to assign to ipRouteMetric2, when adding an EGP learned entry to the
IP Routing Table. The route preference value for an EGP-learned entry is 2. Note
that for route preferences the smaller the value, the higher the preference.
ppeCpuUtilization {ppe 18}
Integer Read-Only
The current CPU utilization of the Packet Processing Engine. Values include:
• low-cpu (1)
• medium-cpu (2)
• high-cpu (3)
ppeRipRouteDiscards {ppe 19}
Counter Read-Only
Number of times a route learned via RIP was not added to the IP Routing Table
due to insufficient Routing Table space.