Specifications

ATX Group
ATX MIB Reference Guide 10-19
configDumpModule {config 19}
Integer Read-Write
Flag to select the module to dump on a crash. If set to a value of 1 to 7 the
relevant module’s memory will be sent to the UART port on detecting a fatal
error situation. A value of zero will disable the dump option. A value of 1 selects
the ME, 7 selects the TURBO, and 2-6 select IOM’s. See configDumpStart and
configDumpEnd.
configDumpStart {config 20}
Integer Read-Write
Starting address of memory to dump upon detecting a fatal error. See
configDumpModule and configDumpEnd.
configDumpEnd {config 21}
Integer Read-Write
Ending address of memory to dump upon detecting a fatal error. See
configDumpModule and configDumpStart.
10.3.3.2 LMA Configuration Group
lma {admin 2}
This group of variables is used by the NMS to learn and modify the configuration
status of the unit’s Local Management Agent.
lmaAllAddr {lma 1}
MacAddress Read-Write
The IEEE all LANs Bridge Management Group Address 01-80-c2-00-00-10.
Changing lmaAllAddr will not take effect until the unit reboots.
lmaAnyAddr {lma 2}
MacAddress Read-Write
A spare LMA address, which is always all zeroes. Changing ImaAllAny will not
take effect until the unit reboots.