Specifications

Chapter 10: Cabletron MIB
10-18 ATX MIB Reference Guide
configPowerPresent2 {config 11}
Boolean Read-Only
Whether the second power supply is present.
configAlarmDynamic {config 12}
Boolean Read-Write
Whether changes in dynamic parameters (except for the dynamically learned
addresses) should cause enterprise specific trap PDUs to be generated.
configAlarmAddresses {config 13}
Boolean Read-Write
Whether changes in the dynamically learned addresses should cause enterprise
specific trap PDUs to be generated.
configStarageFailure {config 14}
Boolean Read-Only
Whether the unit’s storage facility for its configuration parameters has failed (the
unit may not be able to reboot after such a failure).
configAuthenticationFailure {config 15}
IPAddress Read-Only
All nulls, or the IP source address within the last SNMP PDU which caused an
SNMP authentication failure.
configFddiPriority {config 16}
Integer Read-Write
Priority to use when forwarding packets to any FDDI port from any non-FDDI
port.
configTprPriority {config 17}
Integer Read-Write
Priority to use when forwarding packets to any Token Ring port from and
non-Token Ring port.