Specifications

ATX Group
ATX MIB Reference Guide 10-11
hwFirstPort {hwEntry 18}
Integer Read-Only
The IfIndex number of the first port which resides within this module.
hwFatalErr {hwEntry 19}
Octet String Read-Only
A 32 byte array which contains information about the cause of the module’s last
unexpected self-reset, since the unit rebooted. For the Packet Processing Engine
and Turbo, this will always be all zeroes, since failure of such a module will
cause the unit to reboot. For the other modules, this field either contains all
zeroes (if the module has not self-reset), or it contains values according to the
format of configFatalErr, with a first byte of either “Watchdog Timeout” (1) or
“Fatal Error” (3).
hwRptrPorts {hwEntry 20}
Octet String Read-Only
A 4 byte array, where each element represents the repeater capability of the port
belonging to this module. The element value is zero if the port is not present or
does not have any repeater capability; otherwise, the value indicates the number
of repeater ports at that port (see rptrBasGroupNumOfPorts).
hwPortSubType {hwEntry 21}
Octet String Read-Only
A 4 byte array, where each element represents additional port type information.
The following values have been defined:
0x01 CSMA/CD AUI
0x02 CSMA/CD TP repeater with 6 TP ports; limited repeater
management is available (not currently available as a product)
0x03 CSMA/CD TP repeater with 6 TP ports, full repeater
management is available (not currently available as a product)
0x04 CSMA/CD TP with 12 TP ports; full repeater management is
available (not currently available as a product)
0x05 CSMA/CD TP with 12 TP and 1AUI port; full repeater
management is available (not currently available as a product)
0x06 CSMA/CD TP with 24 TP ports; full repeater management is
available
0x07 CSMA/CD TP with 24 TP and 1AUI; full repeater management
is available (not currently available as a product)