Specifications

ATX Group
ATX MIB Reference Guide 10-9
For the HSSI IOM board, any combination of the following errors may be
combined; however, any error will prevent the board from being used:
0x00001 Local SRAM error
0x00002 Shared Ram error
0x00004 Rom Checksum error
0x00008 DMA Circuitry error
0x00010 HSSI IOM Arbitration error
0x00020 ID EEPROM Checksum error
0x00040 UART error
0x00080 Semaphore error
0x00100 CAM error
0x00200 Compatibility (with the PPE) error
hwManufData {hwEntry 8}
DisplayString Read-Only
This is a 24-byte array which contains the part number, serial number, and
hardware revision level of this unit. The Turbo’s hwManufData will be all blanks
since it is manufactured as part of the Packet Processing Engine module.
hwPortType {hwEntry 9}
Integer Read-Only
A 4 byte array, each element represents the port types belonging to this module.
The Packet Processing Engine’s ports are fixed as “uart” for the first port, and
“none” for the other three ports. The Turbo’s ports are fixed as “none” for all
ports. The following port types are supported:
• none (0) - there is no port
• csma (1) - Ethernet or 802.3 port
• fddi-das (2) - FDDI DAS port
• fddi-sas (3) - FDDI SAS port
• tpr (4) - Token Passing Ring port
• wan (5) - Wide Area Network port
• uart (6) - UART port