Installation guide

5-1
Chapter 5
AppleTalk Access Problems
Overview
Introduction
The following table lists the steps and page references to help you solve problems that can
occur when using the AppleTalk functionality on the access server.
Problem Solution
See
Page
Problems with Hosts
Attached to Access
Server Ports
1. Verify AppleTalk Is Enabled
5-3
2. Verify AppleTalk State Is Up
5-3
3. Verify AppleTalk Address Is Within the
Network Range
5-4
4. Verify Cache Size Is Correct
5-4
5. Verify Access Server Is Visible on the
Network
5-5
6. Verify Attached Host Software
5-5
7. Verify PPP and ATCP Are Enabled
5-5
8. Verify Attached Device Is an End Node
5-6
9. Verify Port Configuration - Dedicated PPP
Connection Only
5-6
Performance Problems
1. Verify Unique AppleTalk Addresses
5-7