Installation guide

2-9
LAT Service Connection Problems
Verify Service Rating
To determine if a LAT service is available, verify the service rating.
For services offered by the access server that you are on, enter the following command on
your access server. Substitute the users service name for MONAHON:
Local> SHOW SERVICE MONAHON CHARACTERISTICS
Service: MONAHON
Identification: Internal Production System
Ports: 15
Rating: 0
Enabled Characteristics:
Connections, Queuing
If the service rating is zero, all ports that offer the service are in use and queuing is either
disabled or the queue is full. If the service rating is 90, all ports are in use, but there is
room in the queue. For more information on service ratings and port queuing, refer to the
Network Access Server Management Guide.
For services offered by a service node, enter the following command on your access
server. Substitute the name of the service for GALAXY.
Local> SHOW SERVICE GALAXY
Service GALAXY - 2 Connected
Node Name Status Rating Identification
GALAXY Reachable 0 VAX
If the service rating is zero, the service node cannot accept any new connections. For more
information on service ratings, refer to the Network Access Server Management Guide.