Installation guide

2-7
LAT Service Connection Problems
Command Pool Size: 20480 bytes
Command Pool Used: 8428 bytes
MOP Pool Size: 4096 bytes
MOP Pool Used: 148 bytes
To display the memory configuration of your system, enter the following command:
Local> SHOW MEMORY CONFIGURATION
Dynamic RAM: 4M bytes
Non-Volatile RAM: 128K bytes
FlashRAM:
Installed: Yes
Total size: 2 Mbytes
Boot block: Valid
Load image:
Name: WWENG2
Size: 1756988 bytes
Version: Network Access SW Vn.n BLnn-nn
Resource errors indicate the number of times an internal data structure could not be
created due to the lack of system memory. To look at resource errors, enter the following
command:
Local> SHOW SERVER STATUS
Network Access SW Vn.n for DS716 BLnn ROM Vn.n-n Uptime: 13 16:36:23
Address: 08-00-2B-02-F2-BB Name: GEMNI Number: 65535
Cur High Max
Active Ports: 8 10 16 Minutes to Shutdown: N/A
Active Users: 8 10 16 Discarded Nodes: 15
Queue Entries: 0 1 100 Resource Errors: 57
Available Services: 246 253 N/A Port Framing Errors: 0
Local Services: 1 1 20 Port Parity Errors: 0
Reachable Nodes: 195 195 200 Port Overrun Errors: 0
Boot Device: Ethernet: 0
Active Circuits: 9 9 32 Primary Host: PEACH
Connected Nodes: 7 9 32 Load Address:AA-00-04-00-46-DC
Connected Sessions: 12 20 64 Dump Address: None Available
% CPU Used: 15 36 100 Console User:AA-00-04-00-D3-71
% Memory Used: 80 80 100 Boot Protocol: MOP
Selftest Status: Normal
Software Status: Normal