Installation guide

2-5
LAT Service Connection Problems
For services offered by the access server that you are on, enter the following command on
your access server:
Local> SHOW SERVER CHARACTERISTICS
Network Access SW Vn.n for DS716 BLnn ROM Vn.n-n Uptime: 13 16:36:23
Address: 08-00-2B-02-F2-BB Name: MMS1 Number: 65535
Identification: Pubs terminal server
Circuit Timer: 80 Password Limit: 3
Console Port: 1 Prompt: Local>
Inactivity Timer: 30 Queue Limit: 100
Keepalive Timer: 20 Retransmit Limit: 8
Multicast Timer: 30 Session Limit: 128
Node Limit: 200 Software: WWENG2
TFTP Host: None
Service Groups: 60, 70, 80
Enabled Characteristics:
Announcements, Broadcast, Dump, Lock
In this case, the Service Groups are 60, 70, and 80. Ensure that both the Authorized and
Current Groups defined for the port contain at least one of the Service Groups defined on
the access server. For more information on group codes, refer to the Network Access
Server Management Guide.