Installation guide

Messages 1100 – 1208
28-2
Local -1102-Authorization failure - network address not specified
Explanation: The authorization information calls for a framed session to be established,
but the network address was not specified.
Action: Specify a network address. This can be done on the access server with the
CHANGE PROT n SLIP HOST ADDRESS n.n.n.n command or on a security server host.
See the Network Access Software Management Guide for more information.
Local -1103-Authorization failure - could not set network address
Explanation: The authorization information calls for a framed session to be established,
but the software was unable to assign the network address to the port.
Action: Verify that the network address specified on the security server host is valid and
that no other port on the access server already uses the address.
Local -1104- Authorization failure - no dial service
Explanation: The authorization information calls for a dialback session to be established,
but a dial service was not specified.
Action: Specify a dial service. This can be done in one of three ways:
• On the access server with the CHANGE PORT n PREFERRED | DEDICATED
SERVICE command
• On the access server by changing the dialback service on the target realm
• On a security server host. See the Network Access Software Management Guide for
more information.
Local -1105- Authorization failure - dial service not offered for this port
Explanation: The authorization information calls for a dialback session to be established,
but the dial service specified is not offered on this port.
Action: Use another dial service which is offered on this port, or use another port which
does offer this service.
Local -1106- Authorization failure - unsupported service
Explanation: The authorization information calls for a type of service not supported by
the access server.
Action: Change the type of service on the security server host.