Installation guide

Messages 1000 – 1099
27-2
Local -1051- Port’s default protocol is not DIAL
Explanation: A request to dial a phone number was made, but the current port’s default
protocol is not DIAL.
Action: Specify a dialer service name instead of simply a phone number, or define a
preferred dialer service name and change the port’s default protocol to DIAL.
Local -1052- No ports associated with dialer service
Explanation: A request to use a particular dialer service cannot be accepted because the
named service does not currently specify any ports to use in making the call.
Action: Associate one or more ports with the named dialer service, or select another dialer
service.
Local -1053- Insufficient Dial NVRAM
Explanation: The dialer request or definition failed due to insufficient memory resources.
Action: For more information on reducing Dial NVRAM use, refer to the Network Access
Software Management Guide.
Local -1054- No such dialer service
Explanation: A dial request was made using a dialer service that is not defined.
Action: Define the desired dialer service, or specify the name of a dialer service that is
already defined.
Local -1055- Invalid dialer name
Explanation: An invalid or unknown dialer name was specified.
Action: Specify the name of an existing dialer service, or use only a maximum of 16
alphanumeric characters when naming a new dialer service.
Local -1056- No such dialer script
Explanation: A request was made to associate an unknown dialer script with one or more
ports.
Action: Name an existing dialer script, or define the unknown script.