Installation guide

27-1
Chapter 27
Messages 1000 1099
Overview
Introduction
This chapter provides information on messages 1000 1099. These messages appear
when you are using IPX or a dialer service.
Messages
Local -1000- Active IPXCP port connection; request denied
Explanation: You attempted to use the SET command to change the IPX internal network
number while an active serial line IPX connection existed.
Action: You can use the SET command only when there are no active serial line IPX
connections. Use the CHANGE command at other times.
Local -1001- FRAME currently enabled; request denied
Explanation: You attempted to configure a network for a FRAME that already has a
network number.
Action: You can define the network number and reboot the server.
Local -1050-CHANGE PORT n DIALER SCRIPT
Explanation: A dial request failed because the port used to make the call does not specify
a dialer script.
Action: Specify a dialer script for this port using the SET PORT n DIALER SCRIPT
name command, or correct the dialer service definition by associating one or more ports
that specify a dialer script with it. Then, resubmit the dial request.