Installation guide

25-3
Messages 800 – 899
Local -809- TN3270: invalid operation
Explanation: A command was entered that is not allowed while a TN3270 session is
active.
Action: No user action is required.
Local -810- TN3270: invalid function
Explanation: The TN3270 function name in the SET/DEFINE/CHANGE PORT TN3270
KEYMAP command is not a valid function name.
Action: For a list of TN3270 functions, refer to the Network Access Software Commands
Reference Guide.
Local -811- TN3270: invalid keymap
Explanation: The keymapping sequence in the SET/DEFINE/CHANGE PORT TN3270
KEYMAP command is not a valid keymap sequence.
Action: For a list of TN3270 keymap sequences and the rules governing their use, refer to
the Network Access Software Commands Reference Guide.
Local -812- TN3270: duplicate keymap: remapping xxx to NONE
Explanation: The keymapping sequence in the SET/DEFINE/CHANGE PORT TN3270
KEYMAP command is being used by another TN3270 function. The command was
executed, but the function that used to be mapped to the same sequence was remapped to
NONE.
Action: No user action is required.
Local -813- TN3270: invalid description
Explanation: The description field in the SET/DEFINE/CHANGE PORT TN3270
KEYMAP command is not a valid description.
Action: Enter a string of the maximum (or fewer) allowable ASCII characters.
Local -814- TN3270: NVRAM keymap limit exceeded
Explanation: You exceeded the port’s NVRAM keymap limit when you attempted to use
the DEFINE or CHANGE command on a keymap.
Action: Increase the port’s NVRAM KEYMAP LIMIT. For guidelines on increasing a
port’s NVRAM keymap limit, refer to the Network Access Software Management Guide.