Installation guide

Messages 700 – 799
24-14
Action: Wait and try again.
Local -794- Type only one character or control sequence
Explanation: You tried to specify more than one character as a switch character.
Action: Reenter the command using only one character or control sequence.
Local -795- Logged in ports not changed
Explanation: You attempted to use the SET or CHANGE command to modify a port
characteristic that cannot be changed while the target port is logged in. For example, you
cannot set a port to a dedicated service unless the port is logged out.
Action: Use the DEFINE command or reenter the command when the port is logged out.
Local -796- One or more ports not in correct state for operation
Explanation: The command you entered did not take effect on one or more ports for one
of the following reasons:
• A port was in AUTOBAUD or TEST state.
• A port was in help mode.
• A port was displaying local output.
Action: Reenter the command.
Local -798- No services are known to the local system
Explanation: You entered the SHOW SERVICES command when there were no services
in the access server database.
Action: No user action is required.