Installation guide

24-11
Messages 700 – 799
Local -756- Specified server name already in use
Explanation: You entered the SET/DEFINE/CHANGE SERVER NAME command
specifying a name that already exists in the database.
Action: Reenter the command and specify another name.
Local -761- Unsupported by port hardware
Explanation: You tried to enable a function that is not supported on your device.
Action: For information on supported features, refer to your access server hardware
documentation.
Local -762- Conflict of parameters on (some) port(s)
Explanation: You cannot have SLIP and MULTISESSIONS ENABLED on the same port
at the same time.
Action: Use the SET/DEFINE/CHANGE PORT command to specify either SLIP or
MULTISESSIONS ENABLED.
Local -770- Invalid operation with multisessions enabled
Explanation: You entered a command that cannot be used with session management.
Action: Use the SET/DEFINE/CHANGE PORT MULTISESSIONS DISABLED to turn
off multisessions.
Local -771- Invalid or no response from attached device
Explanation: Session management was terminated for one of the following reasons:
• An attempt by the access server to initiate session management failed when the device
did not respond to session management commands.
• An irrecoverable error occurred during a session management dialogue.
• The terminal and access server versions of session management do not match.