Installation guide

Messages 700 – 799
24-10
Local -746- Monitor currently in use
Explanation: You entered the MONITOR command when another MONITOR command
is still in effect.
Action: You must halt the first monitor display before the access server can begin a
second one.
Local -747- No entries removed
or
Local -748- No entries in local system queue
Explanation: You specified a nonexistent queue entry in a REMOVE QUEUE or
SHOW/MONITOR QUEUE command.
Action: Use the SHOW QUEUE ALL command to check the queue entries. For more
information on configuring and managing the LAT connection queue, refer to the Network
Access Software Management Guide.
Local -750- Another port has this name
Explanation: You specified a name that is already assigned to another port.
Action: Use the SHOW PORT ALL CHARACTERISTICS command to check the names
of other ports. Then, use the SET/DEFINE/CHANGE PORT NAME command to change
the port name.
Local -751- Broadcast command disabled
Explanation: You entered the BROADCAST command on an access server that has
disabled the broadcast facility.
Action: Use the SET/DEFINE/CHANGE SERVER BROADCAST ENABLED command
to enable BROADCAST on the access server.
Local -752- Service limit reached
Explanation: You exceeded the limit (maximum = 20) for the number of services defined
on the access server.
Action: Enter the CLEAR/PURGE SERVICE service-name command to delete unused
services.
Local -753- Lock command disabled
Explanation: You entered the LOCK command on an access server that has disabled the
lock facility.
Action: Use the SET/DEFINE/CHANGE SERVER LOCK ENABLED command to
enable locking on the access server.