Installation guide

21-9
Messages 400 – 499
Local -459-Duplicate security server host name
Explanation: The security server host name entered is already in use.
Action: Reenter the correct host name or select another host name. If the problem persists,
refer to the Network Access Software Management Guide.
Local -460-Duplicate domain name
Explanation: The security server domain name entered is already in use.
Action: Reenter the correct domain name or select another domain name. If the problem
persists, refer to the Network Access Software Management Guide.
Local -461-Only one master security server host allowed
Explanation: You attempted to configure more than one master security server host. You
can configure only one master security server host per configuration.
Action: Verify the master security server host name using the SECURITY command.
Local -462-Only one primary security server host allowed
Explanation: You attempted to configure more than one primary security server host. You
can configure only one primary security server host per configuration.
Action: Verify the primary security server host name using the SHOW SECURITY
command.
Local -463-Only one default security server realm allowed
Explanation: You attempted to configure more than one default security server realm.
You can configure only one default security server realm per configuration.
Action: Verify the default security server realm name using the SHOW SECURITY
command.
Local -464-Failed to open security server socket
Explanation: There is either a memory or network configuration problem.
Action: Verify the Internet parameters. See the section Verify Internet Address (Chapter
3).
Local -465-Security server entry limit exceeded
Explanation: NVRAM memory is full for the security server component.
Action: For more information on reducing security server use of NVRAM memory, refer
to the Network Access Software Management Guide.