Installation guide

21-5
Messages 400 – 499
Local -428- No buffer available to resolve name
or
Local -429- Add to database failure
Explanation: The access server could not complete the operation due to memory
problems.
Local -430- Illegal domain name
Explanation: You specified a domain name that is not valid or does not match the format
requirements for domain names.
Action: For more information on specifying TCP/IP network characteristics, refer to the
Network Access Software Management Guide.
Step Action
1 Try to reconnect to the Telnet resource.
2 If every port on your access server is only intended for Telnet use, enter the
following command:
Local> CHANGE SERVER NODE LIMIT 1
This prevents the access server memory from being filled with service node
information.
3 Verify the number of Internet hosts defined locally in the access server’s
operational database. Enter the following command:
Local> SHOW INTERNET HOST LOCAL
Memory problems can occur if a lot of Internet hosts are defined locally. To
delete locally defined Internet hosts, enter the following command:
Local> CLEAR INTERNET HOST LOCAL
For information on managing your access server as part of the TCP/IP network,
refer to the Network Access Software Management Guide.
4 Verify access server memory usage. See the section Verify Access Server
Memory Usage (Chapter 2).