Installation guide

Messages 300 – 399
20-4
Verify that the keyboard character is mapped to a Telnet function. For more information
on mapping keys to Telnet client and Telnet server functions, refer to the Network Access
Software Management Guide.
Local -311- Telnet option not supported by peer
Explanation: This command requires that an option be supported by the peer (remote
host).
Action: Verify operations supported by peer.
Local -312- Telnet operation invalid in current mode
Explanation: A valid Telnet command was entered, but the request cannot be honored in
the current mode. For example, you suppressed echoing while in remote echoing mode.
Action: Retry later.
Local -316- Not a Telnet function
Explanation: This error is displayed if a user tries to modify an unsupported or unknown
Telnet attribute on an existing telnet session.
Action: Refer to the section Configuring and Managing Interactive Devices in the
Network Access Software Management Guide.
Local -319- Illegal argument
Explanation: An input argument to a Telnet command was invalid.
Action: For more information on valid commands, refer to the Network Access Software
Commands Reference Guide.
Local -320- Telnet function not implemented
Explanation: The Telnet function is not implemented yet.
Action: No user action is required.
Local -321- Telnet option not implemented
Explanation: The Telnet command entered is valid, but the option specified is
unsupported. For example, SET SESSION TELNET BRK SIGNAL generates this error
message because the SIGNAL option is unsupported. Conversely, SET SESSION
TELNET BRK NONE is supported and does not generate this error message.
Action: For more information on valid commands, refer to the Network Access Software
Commands Reference Guide.