Installation guide

Messages 200 – 299
19-6
Local -223- Connection to service-name not established
Node user disconnect
Explanation: The connection request failed or the existing connection was terminated
because the remote node intentionally aborted the connection. This message might occur
as a result of a user-written application running on the host.
Action: Contact the remote node’s system manager.
Local -224- Connection to service-name not established
Circuit timer out of range
Explanation: The access server circuit timer value is out of range.
Action: The circuit timer must be set in the range of 30 to 200 milliseconds. The circuit
timer is factory set to 80 milliseconds, which is the recommended setting for normal
interactive functions. This provides a good balance between response time and service
node performance. For more information on setting the circuit timer, refer to the Network
Access Software Management Guide.
Local -225- Connection to service-name not established
Invalid service class
or
Local -226- Connection to service-name not established
Invalid message or slot received
Explanation: The access server is receiving messages that violate the LAT protocol.
Step Action
1 Try to reconnect to the service.
2 If the connection fails, reinitialize the access server to downline load the software.
3 Verify that the access server is running the latest software.
4 Try to reconnect to the service.
5 If the error messages reappear, you might have a software problem.