Installation guide

Messages 000 – 099
18-2
Action: Hang up the local modem by logging out of the access server. If necessary,
prepare the local modem to receive the incoming callback from the access server.
Local -020- Logged out port port_number on server server_name.
Explanation: This message is displayed on the local terminal when the port is logged out.
Action: No action is required.
Local -040- Software initialization complete
Explanation: This informational message indicates that the network access server is
ready to use. It is displayed on the console port (if a console port is enabled) after the
server is initialized.
Action: No action is required.
Local -041- Flash RAM update complete
Explanation: An update to the image loaded in Flash RAM was requested during the
reinitialization and has been successfully completed.
Action: No action is required.
Local -042- Flash RAM update failed
Explanation: An update to the image loaded in Flash RAM was requested during the
reinitialization and the update has failed. Additional error messages will give the specific
reason for the failure.
Action: Refer to the specific error messages for the course of action.