Installation guide

16-3
Remote Login Problems
Verify Internet Address
If you are unable to connect to a Rlogin resource using an Internet address, enter the
following command:
Local> SHOW INTERNET
State: Enabled
Internet Address: 0.0.0.0 (Learning)
Subnet Mask: 0.0.0.0
DHCP: Enabled
TCP Keepalive Timer: 120
TCP Keepalive Retry: 8
For more information on specifying the TCP/IP network characteristics for your access
server, refer to the Network Access Software Management Guide.
Verify Internet Host Name
If you are unable to connect to a Rlogin resource using an Internet host name, enter the
following command:
Local> SHOW INTERNET HOST ALL
Internet Address Name
195.1.1.60 SALES.MKTG.FOO.COM
195.1.1.62 ACCT.MKTG.FOO.COM
Verify that the Internet host name is defined in the Internet
database. For more information on configuring the Internet
host name, refer to the Network Access Software Management
Guide.
Step Action
1 Verify that the Internet address and subnet mask are correct.
2 If you are not using the default subnetwork mask, ensure you set the subnet mask
before you set the Internet address.
3 If your Internet address is set to 0.0.0.0, then define your Internet address using the
following command. Substitute your Internet address for 195.1.1.60:
Local> CHANGE INTERNET ADDRESS 195.1.1.60