Installation guide

15-5
Accounting Problems
Verify Server Console Port
To verify that the server console port is enabled, enter the following command:
Local> SHOW SERVER
Network Access SW Vx.x for DS716 BLxx-xx ROM Vx.x-x Uptime:0
00:16
Address: 08-00-2B-26-AA-99 Name: WWDOCMC Number: 0
Identification:
Circuit Timer: 80 Password Limit: 3
Console Port: 1 Prompt: Local>
Inactivity Timer: 30 Queue Limit: 100
Keepalive Timer: 20 Retransmit Limit: 8
Multicast Timer: 30 Session Limit: 64
Node Limit: 200 Software: WWENG2
TFTP Host: None
Service Groups: 42, 46, 66
Enabled Characteristics:
Announcements, Broadcast, Dump, Lock
If the console port is set to NONE or is not the port on which you want logging to occur,
enter the following command. (n is the port number to which you want to log accounting
events. Substitute the number of the port for n.)
Local> CHANGE SERVER CONSOLE n