Installation guide

11-15
Printer Configuration Problems
Telnet Printer Not Creating a Newline
Solution
If your printer does not create a newline when printing, enter the following command on
your access server. Substitute the port number for 1:
Local> SHOW PORT 1 TELNET SERVER
Port: 1
Xmit Char Size: 8 Newline From Term: <LF>
Rcv Char Size: 8 Newline From Host: None
IP: None Newline To Term: None
AYT: None Newline To Host: <CRLF>
AO: None EC: None
EOR: None EL: None
NOP: None BRK: Break
PPP Hot Key: None SLIP Hot Key: None
Echo Negotiate: Initiate
Verify the setting for the Newline From Term characteristic. The Telnet Client system that
accesses the printer might not be sending the same character to create a newline as the
Newline From Term characteristic. Determine what the Telnet Client sends as the newline
character. If these characters are different, enter the following command on your access
server. Substitute your port number for 1 and your newline character for newline-char:
Local> CHANGE PORT 1 TELNET CLIENT NEWLINE FROM TERMINAL newline-char
For more information on specifying the Telnet server newline characteristics, refer to the
Network Access Software Management Guide.